Deleted obsolete script files: buildApp.sh and getESP32.sh

buildApp.sh

-## Author: Felix Omwansa
- 
-echo ""
-echo "[$0]: This file should be run in the directory where the project is located. 
-Paste and run it in the directory, although this is done automatically from buildESP32.sh"
-
-##Allow read and write access to USB device
-echo ""
-echo "[$0]:  Setup access to USB device"
-sudo chmod a+rw /dev/ttyUSB0
-
-##configure project
-echo ""
-echo "[$0]:  Run configuration menu"
-make menuconfig
-
-##erase and flash current project to ESP and run serial monitor to view results
-echo ""
-echo "[$0]:  Erase everything on device then flash the current project"
-make erase_flash flash monitor
-
-

getESP32.sh

-## Author: Elliot Williams
-## Modified by : Alois Mbutura
-
-## BASE variable-This is where you want the entire toolchain to live
-## You should run this script from within the destination directory, or redefine the BASE variable to fit your lifestyle.
-
-#The script here is derived from: http://esp-idf.readthedocs.io/en/latest/linux-setup.html
-
-BASE=$(pwd)
-
-echo ""
-echo "[$0]:  Checking for system prerequisites."
-
-#Archlinux
-if [ $(which pacman) ]
-then
-	echo "[$0]:  Found archlinux based system."
-	sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial wget 2>/dev/null
-fi
-
-#Ubuntu
-if [ $(which apt-get) ]
-then
-	echo "[$0]:  Found Ubuntu based system."
-	sudo apt-get update
-	sudo apt-get install git make libncurses-dev flex bison gperf python python-serial wget 2>/dev/null
-fi
-
-#Any other system goes here
-
-# Get or update IDF
-echo ""
-echo "[$0]:  Get or update IDF"
-if [ -d esp-idf ]
-then 
-	echo "[$0]:  Found esp-idf, updating."
-	cd esp-idf 
-	git pull && git submodule update --recursive 
-	cd $BASE
-else  ## not found, get it
-	git clone --recursive https://github.com/espressif/esp-idf.git
-fi
-
-## Perform mandatory removal of any tar files in case of a previous error
-if [ -f *.tar.gz ] || [ -f *.tar.gz.* ]
-then
-	echo ""
-	echo "[$0]:  Removing residual tar file(s)"
-	rm *.tar.gz 2>/dev/null
-	rm *.tar.gz.* 2>/dev/null
-fi
-
-## Get 64 bit linux binary toolchain -- this might get out of date when they change blobs:
-## Current version 1.22.0-61-gab8375a-5.2.0
-echo ""
-echo "[$0]:  Get 64 bit linux binary toolchain -- this might get out of date when they change blobs"
-
-if [ -d xtensa-esp32-elf ]
-then 
-	echo "[$0]:  Found ESP32 binary toolchain. Performing mandatory replacement."
-	echo "[$0]:  Current version at the making of this makefile 1.22.0-61-gab8375a-5.2.0"
-	echo "[$0]:  Check current version from http://esp-idf.readthedocs.io/en/latest/linux-setup.html"
-	rm -rf xtensa-esp32-elf
-	wget https://dl.espressif.com/dl/xtensa-esp32-elf-linux64-1.22.0-61-gab8375a-5.2.0.tar.gz
-	tar -xvzf xtensa-esp32-elf-linux64-1.22.0-61-gab8375a-5.2.0.tar.gz
-#	rm *.tar.gz 2>/dev/null && rm *.tar.gz.* 2>/dev/null
-else
-	wget https://dl.espressif.com/dl/xtensa-esp32-elf-linux64-1.22.0-61-gab8375a-5.2.0.tar.gz
-	tar -xvzf xtensa-esp32-elf-linux64-1.22.0-61-gab8375a-5.2.0.tar.gz
-	rm *.tar.gz 2>/dev/null && rm *.tar.gz.* 2>/dev/null
-fi
-
-## Get demo application
-echo ""
-echo "[$0]:  Get demo application"
-if [ -d esp-idf-template ]
-then 
-	echo "[$0]:  Found esp-idf-template, updating."
-	cd esp-idf-template 
-	git pull 
-	cd $BASE
-else  ## not found, get it
-	git clone https://github.com/espressif/esp-idf-template.git
-fi
-
-## Setup environment variables:
-##  Works for _this_ directory structure.  You will need to change these if you deviate
-## Also, you might copy these lines into a separate script  to reset these variables as necessary.
-
-echo ""
-echo "[$0]:  Setup environment variables"
-echo "[$0]:  Exporting environment variables:"
-export IDF_PATH=${BASE}/esp-idf
-echo "[$0]:  export IDF_PATH=${BASE}/esp-idf"
-export PATH=$PATH:${BASE}/xtensa-esp32-elf/bin
-echo "[$0]:  export PATH=$PATH:${BASE}/xtensa-esp32-elf/bin"
-
-echo ""
-echo "[$0]:  IDF demo instructions"
-echo "[$0]:  [1] cd $BASE/esp-idf-template and"
-echo "[$0]:  [2] Type make menuconfig or make flash to get started"