echo"[$0]: This builds the development framework for the ESP32, and set required variables."
echo"[$0]: NOTE: You should run this script from within the destination directory."
##FUNCTION: build development framework
build_framework(){
echo"FUNCTION: build_framework"
echo"[$0]: This will build the development framework for the ESP32, set the required path variables and move the resource folders into the project folder."
## Install the esp-idf and set required variables
## Install the esp-idf and set required variables
## BASE variable-This is where you want the entire toolchain to live
## BASE variable-This is where you want the entire toolchain to live
#The script here is derived from: http://esp-idf.readthedocs.io/en/latest/linux-setup.html
#The script here is derived from: http://esp-idf.readthedocs.io/en/latest/linux-setup.html
##read user action after completing building the framework
custom_app_instructions
read action
##eddystone
if[$action= build_eddystone_app ]
then
build_eddystone_app
#nodejs_app
elif[$action= build_nodejs_app ]
then
build_nodejs_app
#quit
elif[$action= quit ]
then
echo""
echo"[$0]: Bitsoko ESP32 script terminated"
echo""
fi
}
##end of function
#BUILDAPP FUNCTION: TO BE USEFUL LATER
#FUNCTION: compile and flash custom app to the ESP32
build_app(){
build_app(){
echo""
echo""
echo"[$0]: This compiles and flashes the project into the ESP32."
echo"[$0]: This compiles and flashes the project into the ESP32."
...
@@ -106,7 +140,7 @@
...
@@ -106,7 +140,7 @@
#compiling and flashing project binaries
#compiling and flashing project binaries
##Allow read and write access to USB device
##Allow read and write access to USB device
echo""
echo""
echo"[$0]: Setup access to USB device: the ESP"
echo"[$0]: Setup access to USB device: "
sudo chmod a+rw /dev/ttyUSB0
sudo chmod a+rw /dev/ttyUSB0
##configure project
##configure project
...
@@ -117,52 +151,113 @@
...
@@ -117,52 +151,113 @@
##erase and flash current project to ESP and run serial monitor to view results
##erase and flash current project to ESP and run serial monitor to view results
echo""
echo""
echo"[$0]: Erase everything on device then flash the current project"
echo"[$0]: Erase everything on device then flash the current project"
make erase_flash flash monitor
make erase_flash flash
echo"[$0]: BUILD SUCCESSFUL"
echo""
pwd
echo""
ls
echo""
}
}
##end of function
build_flash(){
##FUNCTIONS: building custom apps
#building development framework and flash project in one operation
build_eddystone_app(){
build_framework
##run path_config to set up environment variables
. path_config.sh
cd narra/ble_app_eddystone
echo""
pwd
echo""
ls
echo""
build_app
build_app
}
make monitor
####################################
}
build_nodejs_app(){
##run path_config to set up environment variables
. path_config.sh
echo""
pwd
echo""
ls
echo""
echo""
echo"APP BUILD INSTRUCTIONS"
echo""
echo"[$0]: Run 'listenNode.sh' in the terminal that opens AFTER app has been built successfully. This script will open a serial monitor to show the notification dialog box that detects action on the ESP."
cd narra/esp32-nodejs-app/gatt_server_notif_switch
build_app
##open separate terminal created by the "listenNode.sh"
gnome-terminal
make monitor
}
##any other build function goes here
####################################
#Build instructions
#Build instructions
custom_app_instructions(){
echo""
echo"[$0]: 2. Run 'build_eddystone_app' to compile and flash the eddystone project to the ESP32."
echo""
echo"[$0]: 3. Run 'build_nodejs_app' to compile and flash the nodejs_app project to the ESP32."
echo""
echo"[$0]: 4. Run 'quit' to quit."
echo""
}
echo""
echo""
echo"[$0]: PROJECT BUILD INSTRUCTIONS"
echo"[$0]: PROJECT BUILD INSTRUCTIONS"
echo"Bitsoko ESP32 script initialized. What would you like to do?"
echo""
echo""
echo"NOTE: All commands should be run from the current directory, and custom apps can only be build after the framework has been setup."
echo"[$0]: 1. Run 'build_framework' to build the development framework for ESP32 in the working directory."
echo""
##echo "[$0]: 2. Run 'build_app' to compile and flash project in the working directory into the ESP32."
echo"What would you like to do?"
##echo "[$0]: 3. Run 'build_flash' to development framework and flash project in one operation."
echo""
echo"[$0]: 1. Run 'build_framework' to setup the development framework for ESP32 in the working directory."
echo""
echo"[$0]: 2. Run 'build_eddystone_app' to compile and flash the eddystone project to the ESP32."
echo""
echo"[$0]: 3. Run 'build_nodejs_app' to compile and flash the nodejs_app project to the ESP32."
echo""
echo"[$0]: 4. Run 'quit' to quit."
echo"[$0]: 4. Run 'quit' to quit."
echo"[$0]: Copy 'buildApp.sh' into any project directory and run it to compile and flash the project to the ESP32."
echo""
echo""
echo"[$0]: FURTHER PROJECT BUILD INSTRUCTIONS"
echo"[$0]: Run 'listenNode.sh' in esp32-nodejs-samples to open a notification dialog to detect action on the ESP32.sh."
echo"[$0]: In case of errors of path configurations, run 'path_config.sh' in esp32 to set the required variables then try again."
